CYC X1PRO GEN4 Motor only. 92mm Pressfit Bottom Bracket

$2,599.00

The all new CYC GEN4 X1PRO The ultimate e bike motor for those that want real power, versatility & tune ability. MASSIVE 260nm of TORQUE 

Out of stock

Description

INTRODUCING THE ALL NEW CYC X1 PRO GEN4 5000watt motor. CYC have been busy developing their new generation e bike motors. The new GEN4 X1 Pro motor has a few upgrades on the GEN3 model including tbe new X12 5000watt controller. They’ve listened to rider & dealer feedback (they got a lot from us) & have come up with some ground breaking stuff.

THIS LISTING IS FOR THE CYC X1 Pro GEN4 to suit 90-82mm Pressfit bottom brackets, DS103 display, 38t chainring thumb throttle & 175mm cranks. Let us know what combination of parts you need & we’ll give you a  price. OPTIONS ARE LISTED BELOW.

 Designed as a modular system it uses the same basic motor module for all bike types & you choose the display, chainring, bottom bracket width, crank length & battery voltage that works for you. They can run on 36-72 volts so it’s quite likely that your existing battery will work or you can choose from our large range of batteries to suit your frame shape, power & range requirements.

With an advanced torque sensor system, 200nm of torque & seamless power delivery this is an absolute joy to use. There’s an easy to use app so you can fine tune the power delivery to suit your riding style. Simple to install & will accept multiple battery voltages without having to reprogram the controller.

3 display options. SW102, DS103 & 750c up to 72volts.  2 crank lengths 165mm & 175mm

3 chainring options. 32t 38t 42t

Multiple bottom bracket options. 68-83mm, 92mm pressfit, 100mm, 120mm. Other sizes can be made to work, just tell us what you need.

Thumb throttle

11/63 Chainring option

WE CARRY SPARE PARTS FOR ALL OUR MOTORS. PLEASE CONTACT US ABOUT THESE AS THEY MAY NOT BE LISTED ON OUR WEBSITE.

SPECIFICATIONS

36-72 DCV (nominal) (10-20s Batteries)

Up to 5000Watts with the X12 controller & suitable battery

260nm of stump pulling torque!

Anodized Black

3.8 kg

7075-T6

165mm or 175mm

11/53 option with 32T bike chainring

11/63 option with 38T bike chainring

12/72 option with 42T bike chainring

Controller

Display

Throttle

Bottom bracket

Speed sensor

Wiring

PAS sensor

Thumb, half-twist, or full throttle

BSA Threaded & Pressfit options

Magnetic sensor

Waterproof wire (Julet connector)

Integrated torque & cadence sensor

Magnetic sensor for all brakes optional

COMPATIBILITY

BSA Threaded Frames 34.5 bottom bracket inside diameter 68, 73, 83, 100 & 120mm.

Pressfit Frames. 41, 42 & 46mm bottom bracket inside diameter. 88, 90, 92mm

MOTOR

Motor type In Runner

Stator lamination 0.2mm

Magnet N45SH (>180 C)

Wiring 0.7mm2

Efficiency >93%

Maximum RPM >12000rpm

Rated Torque >5nm

Transparent cover Tempered Glass

Epoxy sealed​ Black Epoxy Potted

GEARBOX

First stage 1:6 Hardened steel plantetery

Second stage 219H Chain

Overall reduction ratio
from motor to crank

1:28.9 (11/53T)

1:34.4 (11/63T)

1:36 (12/72T)

 

 

 

 

 

 

 

 

 

 

 

 

 

Reviews

There are no reviews yet.

Be the first to review “CYC X1PRO GEN4 Motor only. 92mm Pressfit Bottom Bracket”

Your email address will not be published. Required fields are marked *